Maytag Washer Repair in College Park & Hyattsville, MD

Maytag washers include top-load agitator machines, impeller models such as the older Bravos, Pet Pro washers with a hair filter, and front-loaders, along with some pre-merger Neptunes that are still running. On current top-loaders the lid lock is the most frequent failure; when it can't confirm that it is locked, the machine stops and shows F5 E2. The drain pump can jam on a sock or a coin, and on direct-drive models the plastic coupler between motor and transmission wears out, so the motor runs but the agitator doesn't. Impeller machines use a shifter to switch between agitate and spin, and when that fails the washer gets stuck in one mode. In a basement laundry, look also at the standpipe or utility sink: a slow house drain can make a healthy washer look broken.

Where we start on this pairing: Lid lock not engaging (F5 E2); Drain pump jammed by a small item; Motor coupler worn, agitator idle; Pet Pro filter packed with hair; Shifter stuck between agitate and spin.

Treat that list as leads rather than conclusions. Identical symptoms can hide a minor fault or a major one, and the only way to know which is to test the appliance where it's installed, which comes before any quote.

Laundry in Hyattsville's older houses is usually down in the basement, in rooms that predate washing machines, emptying into a laundry tub or floor drain. In Old Town College Park rentals, one washer may serve an entire house of students, and its pump filter collects coins, hair ties and lint quickly. The newer apartments along Baltimore Avenue use stacked or compact units in closets, where a leak reaches the unit below before anyone notices.

Washers sit in the basements of Hyattsville's Victorians and bungalows, in closets in the Route 1 apartment buildings, and in shared basements of College Park houses rented to groups of students.

Whatever the brand, the washer symptom that misleads people most is a display code taken as proof of a failed part when it only reports a condition, such as an unbalanced load, a half-open supply valve or a drain hose pushed too far down the standpipe.

Locally, what we watch for most on a washer is front-loaders that grow mildew in their door gaskets through humid summers, and stacked units in condo closets where any leak reaches the unit below.

First the diagnosis, done at your home or business. Then an explanation in plain terms: which part failed, why it probably did, and what the fix involves. Then a price, and only after you agree to it does any work begin.

If the numbers don't add up for an older appliance, you hear that too. You're never committed to a repair just because we came out to look.