Maytag washer repair
Maytag Washer Repair in Bowie, MD
At your Bowie address, the technician checks the Maytag washer in place, shows you which part failed, and prices the repair before starting.
Booking online works too. Include the maytag washer's model number and your Bowie street, and we can check parts first.
First the appliance and its location, then your contact details. We follow up to schedule.
washer brands we repair
Maytag Washer Repair in Houses, Townhomes and Condos
This page covers ZIP codes 20720, 20721. We have no tie to Maytag; if yours is still under the manufacturer's warranty, contact Maytag before booking us. The model number helps us bring the right part.
How a Washer Repair Visit Works
Book the Visit
Call or use the form. Name the make and describe the fault; a model number, if handy, speeds up parts.
Find the Fault
At your place, the technician checks the appliance and whatever feeds it (power, water, drain, gas or venting) until the cause is clear.
Approve the Price
You get a plain explanation and a price for the repair. The work starts only if you say yes.
Fix and Check
The new part is fitted and the appliance is run through a cycle, so you can see it working.
Related Services
More appliances, brands and areas on this site.
Maytag Washer Faults We Diagnose
One symptom can have several causes, so the part is tested at your home before you get a price.
- Not Spinning
- Not Draining
- Making Loud Noise
- Won't Start
- Leaking Water
- Not Filling with Water
- Door Won't Lock
- Vibrating Excessively
- Error Codes Displayed
- Not Agitating
- Clothes Not Getting Clean
- Washer Smells Bad
- Mold in Drum or Gasket
- Musty Odor Transferring to Clothes
- Door Gasket Mold
- Not Rinsing Properly
- Too Much Suds / Oversudsing
- Detergent Not Dispensing
- Fabric Softener Not Dispensing
- Bleach Dispenser Clogged
- Spin Cycle Stopping Early
- Not Completing Full Cycle
- Cycle Taking Too Long
- Pausing Mid-Cycle
- Filling Too Slowly
- Overfilling with Water
- Standing Water After Cycle
- Not Draining Completely
- Grinding Noise During Wash
- Banging Noise During Spin
- Squealing Noise
- Clicking Noise During Cycle
- Burning Smell from Washer
- Door Won't Open After Cycle
- Door Glass Cracked or Broken
- Door Seal / Gasket Torn or Damaged
- Leaking from Bottom
- Leaking from Door
- Leaking from Back of Washer
- Leaking from Detergent Drawer
- Drum Not Turning
- Agitator Not Working
- Agitator Dogs / Cogs Worn Out
- Drum Bearing Making Noise
- Drive Belt Broken
- Motor Failure
- Drain Pump Failure
- Water Inlet Valve Failure
- Lid Switch / Lock Failure
- Control Board Failure
- Water Temperature Wrong
- Washing Cold Only / No Hot Water
- Clothes Getting Damaged in Washer
- Tearing or Ripping Clothes
- Clothes Coming Out Tangled
- Soap Residue on Clothes
- Fabric Softener Spots on Clothes
- Rust Stains on Clothes
- Washer Won't Turn On
- Display / Control Panel Not Working
- Buttons Not Responding
- Pausing Randomly During Cycle
- Tripping Circuit Breaker
- Shaking the Floor During Spin
- Washer Moving Across Floor During Spin
- Not Balancing Load During Spin
- UE / Unbalance Error (LG)
- OE / Drain Error (LG)
- LE / Motor Error (LG)
- DE / Door Error (LG)
- 5E / SE Drain Error (Samsung)
- F21 Drain Error (Whirlpool)
- F5 / dL Lid Lock Error (Whirlpool / GE)
- Drum Bearing Replacement Needed
- Shock Absorbers Worn Out
- Spider Arm / Drum Support Broken
- Pump Filter Clogged
Other Washer Brands
Other Maytag Appliances
Maytag washer repair in Bowie
Maytag washer repair in Bowie, in all 2 of its ZIP codes: we diagnose it at your home and give you a price, and no work starts until you accept it.
Bowie began as a small railroad stop and became a sizable city once Levitt and Sons started building Belair at Bowie in 1960. Around that core, later decades added cul-de-sac subdivisions, townhouse courts and the larger-lot neighborhoods of Fairwood and Mitchellville on both sides of US 50.
On a Maytag washer we check the drain before the fill, and both before the motor, drive and bearings, because a washer that refuses to spin usually still holds water it can't get rid of. On the parts side, it's built on the Whirlpool platform, which decides what fits.
Call or book online, and we'll find a time that suits you.
Inside a Maytag washer
Maytag washers include top-load agitator machines, impeller models such as the older Bravos, Pet Pro washers with a hair filter, and front-loaders, along with some pre-merger Neptunes that are still running. On current top-loaders the lid lock is the most frequent failure; when it can't confirm that it is locked, the machine stops and shows F5 E2. The drain pump can jam on a sock or a coin, and on direct-drive models the plastic coupler between motor and transmission wears out, so the motor runs but the agitator doesn't. Impeller machines use a shifter to switch between agitate and spin, and when that fails the washer gets stuck in one mode. In a basement laundry, look also at the standpipe or utility sink: a slow house drain can make a healthy washer look broken.
Common Maytag washer failures
Where we start on this pairing: Lid lock not engaging (F5 E2); Drain pump jammed by a small item; Motor coupler worn, agitator idle; Pet Pro filter packed with hair; Shifter stuck between agitate and spin.
Treat that list as leads rather than conclusions. Identical symptoms can hide a minor fault or a major one, and the only way to know which is to test the appliance where it's installed, which comes before any quote.
Maytag washers in Bowie homes
Belair-era houses with laundry in a main-floor utility room or basement sit alongside newer colonials with upstairs laundry, double wall ovens and a second refrigerator in the garage.
The washer fault people misjudge
Whatever the brand, the washer symptom that misleads people most is a display code taken as proof of a failed part when it only reports a condition, such as an unbalanced load, a half-open supply valve or a drain hose pushed too far down the standpipe.
Locally, what we watch for most on a washer is front-loaders that grow mildew in their door gaskets through humid summers, and stacked units in condo closets where any leak reaches the unit below.
Gas ranges, gas dryers and safety
Three complaints come up again and again with gas appliances: the oven igniter glows and nothing lights, a cooktop burner ticks without catching, and a gas dryer turns but never warms. Most trace to a worn igniter, a weak valve coil or a flame sensor, all ordinary parts.
Gas piping and the shutoff valve behind the appliance aren't ours to work on; if we see a problem there, you'll be told to call a licensed gas fitter.
At a Glance
Maytag Washer Repair Questions
The questions that come up most often. Anything not covered here, ask us when you call, or add it to the booking form's notes field.
Have a different question?
Tell us what make it is and what's going wrong. A few things can be settled over the phone, and anything else gets looked at during the visit.
Start with the manufacturer while the warranty is running; covered repairs are handled by its own network, and we're an independent company with no factory authorization. After the warranty ends, or for a fault it excludes, book with us in Bowie.
Usually. List every appliance giving trouble when you book a Bowie visit, with model numbers if you have them, so enough time is set aside and the likely parts come along.
It depends on what failed. A switch, valve, pump or element costs a fraction of a control board or sealed-system job, and you get the figure after the diagnosis, before any work.
Often, if we have the model number beforehand. Maytag shares parts with the other Whirlpool brands, so compatible parts are usually easy to find, even for older units. Anything that has to be ordered comes with a lead time you hear before deciding.